Situation may come when your
watch stop working. But it should not be a reason of agonize for you must first
you should check whether the hands are moving forward or its get slow down now.
If you see that the hands are moving slowly, then it’s a sign that you need to take
out a watch battery replacement
soon. It is not necessary for you to consider going to a watch repairer for
this service for you can take care of it on your own by following some easy
steps.
The first thing which you need to
do is that you should take is to turn over your watch on a soft surface to
prevent scratching the top crystal cover. The second step after this is to open
up the back cover. You should do this after confirming if there is a little
sunken part at the cover's edge then you can open the cover with a knife. In
the case of watches where screws hold the back cover, they should be unscrewed
with a small screwdriver, to let you open the back cover. When doing this, do
not forget to take off the rubber gasket placed around the cover's edge.
The step you should follow next
in watch battery replacement is to
find out where the battery is and what holds it in place. Most batteries are
round in shape and screwed covers or spring clips hold them in place. You
should get the right tool to open the specific cover, which is a screwdriver
for the screw cover or a small tool with a flat blade for the spring cover. It
is also essential to know the positive side of the battery by checking for a
large plus sign on the end. When replacing the battery, the thing to look for
is the identification number, of the one, you are replacing. That number should
match with the replacement battery's number.
To clean the battery you need to
use clean piece of cloth.
No comments:
Post a Comment